Sutinna1800W 40A ZVS Induction Heating Board Module

November 11, 2023 Off By habakkukmaya_brfmnm






Sutinna1800W 40A ZVS Induction Heating Board Module


Sutinna1800W 40A ZVS Induction Heating Board Module

Are you looking for a high-quality induction heating board module? Look no further than the Sutinna1800W 40A ZVS Induction Heating Board Module. With its superior heat dissipation, low voltage DC power supply, and multifunctional use, this product is a must-have for anyone in need of efficient heating solutions.

Specifications

  • Input Voltage: 12V-48V (Recommendation: above 36V)
  • Power Requirments: Less than 12V >=10A, More than 15V >=15A
  • Maximum Power: 1800W
  • Maximum Current: 40A
  • Heater Inner Ring: 70mm / 2.8in
  • Size: 18 * 12 * 9 cm / 7.1 * 4.7 * 3.5in
  • Weight: Approx. 1052g

Package Included

1 x PCB Board

1 x Copper Tube

Note

  1. When using a switching power supply, make sure that the power supply voltage is stable before connecting to the induction heating circuit.
  2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.
  3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.
  4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the power supply.
  5. If you find that the MOS tube is hot, first consider whether the power output meets the requirements.
  6. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.
  7. It is recommended to use a 36V 20A power supply. Below 12V is very dangerous.

About this item

Superior Heat Dissipation

This product has a maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect.

12-48V Low Voltage DC

12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation.

Multifunctional

Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient. With a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc.

Recommended Voltage

Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.

After Sales Service

If there are any using problems or unsatisfactory with our products, please feel free to contact us, our professional customer service team of Sutinna will consult the issues with sincerity. Thanks for purchasing from us.

See more product details here